Removing The Maintop-Sealed Burner Models - Whirlpool SF372BEE W/N Service Manual

WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electri-
cal shock.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
1. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2. Remove the grates and burner caps from the
maintop.
3. Remove the screws from each burner.
SCREW
BURNER
REMOVING THE MAINTOP
Sealed Burner Models
MAINTOP
3-2
4. Lift each burner off the venturi and burner
ignitor.
5. Push the front of the maintop to the right while
lifting the right corner and unclip it, then push
to the left and unclip the left corner. Lift the
maintop and prop it up.
PUSH TO
SIDE AND MAINTOP
LIFT TO
UNCLIP
CLIP
SIDE PANEL
If you are removing the maintop, continue to step 6
on the next page.
BURNER
BURNER
IGNITOR
VENTURI
MAINTOP