Download Print this page

Removing The Bake Burner & Ignitor - Whirlpool SF372BEE W/N Service Manual

Freestanding self-clean gas range
Hide thumbs

Advertisement

REMOVING THE BAKE BURNER & IGNITOR
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electri-
cal shock.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
1.
Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2.
Remove the oven door (see page 1-20 for the
procedure).
3.
Remove the racks from the oven.
4.
Remove the two screws from the oven floor
and remove it.
REMOVE
SCREWS
Cooking Products Service Manual
Original
July, 1996
© 1996 Whirlpool Corporation
5.
Remove the heat shield from the oven .
REMOVE SCREWS
6.
Remove the front and back mounting screws
from the bake burner.
BAKE BURNER
MOUNTING
SCREW
7.
Remove the storage drawer.
8.
From inside the storage drawer area, discon-
nect the bake ignitor quick-disconnect plug
from the main harness.
9.
Remove the bake burner and ignitor assem-
bly from the oven.
10. Reinstall the new bake burner and ignitor
assembly and reassemble the range.
3-23
4321891
Page 3-23
OVEN LINER
MOUNTING
SCREW
BRACKET
BAKE
IGNITOR
QUICK-DISCONNECT
PLUGS (LOCATED IN
STORAGE AREA)
BACK OF
MOUNTING
SCREWS
HOLE IN
BOTTOM LINER

Hide quick links:

Advertisement

loading

  Related Manuals for Whirlpool SF372BEE W/N