REMOVING/REINSTALLING THE OVEN DOOR
To remove the oven door:
Open the door approximately half way and
install the shipping pin (supplied with the
range), or a
" allen wrench, into the hinge
hangers on each side of the door.
insert shipping pin or
allen wrench in this hole
Close the oven door as far as the shipping
pins will allow.
Lift the door as far as possible so the slots in
the hinge hangers clear the pins, then rotate
the top toward you, and pull the hinges from
the slots in the front of the range.
To reinstall the oven door:
Insert the hinge hangers into the front slots of
the range as far as they will go, then lift the
door while you push against it, and hook the
hinge slots in the pins.
remove shipping pin or
allen wrench from this hole
Remove the shipping pins and close the door.