Removing The Oven Door Handle, Top Trim, & Outer Door Glass - Whirlpool SF372BEE W/N Service Manual

REMOVING THE OVEN DOOR HANDLE,
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electri-
cal shock.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
REMOVING THE OVEN
DOOR HANDLE
1. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2. Remove the oven door (see page 1-20 for the
procedure), and position it on the floor with the
handle and outer door glass facing up.
3. Remove the two door handle screws from the
liner side of the door. Remove the old handle
and install the new one with the two screws.
4. Reinstall the oven door on the range.
TOP TRIM
HANDLE
SET GLASS
BOTTOM TRIM
TOP TRIM, & OUTER DOOR GLASS
MOUNTING SCREWS
OUTER DOOR
GLASS
REMOVING THE TOP TRIM
& OUTER DOOR GLASS
1. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
2. Remove the oven door (see page 1-20 for the
procedure), and position it on the floor with the
handle and outer door glass facing up.
3. Raise the top of the door and remove the two
screws that secure the top of the door trim and
the handle to the door liner, then remove the
handle and top trim.
4. Lift the outer door glass off the door and set
the new glass in its place so that the bottom
edge is against the bottom trim.
5. Install the new top trim and handle on the oven
door and secure them in place with their two
mounting screws.
6. Reinstall the oven door on the range.
3-30