Converting The Oven Burners For L.p. Gas - Whirlpool SF372BEE W/N Service Manual

CONVERTING THE OVEN BURNERS FOR L.P. GAS

THE BAKE BURNER
1. Remove the oven racks.
2. Remove the two screws from the oven floor
and remove the floor.
screws
3. Remove the screws from the heat shield over
the bake burner and remove the shield.
heat shield
screws
1 " combination wrench and turn the
4. Use a /
2
orifice hood at the base of the bake burner
clockwise until it is just snug (approximately
2- 1 / turns). NO NOT OVERTIGHTEN THE
2
HOOD.
orifice hood
hood
pin
Natural gas
increases
flame size in
this direction
bake burner
L.P. gas
decreases flame
size in this direction
Cooking Products Service Manual
Original July, 1996
© 1996 Whirlpool Corporation
THE BROIL BURNER
1. Remove the oven racks.
2. Remove the two screws (shown in the illustra-
tion) from the broil burner and lift the burner
off the orifice hood.
broil burner
screw
orifice hood
pin
Natural gas
increases
flame size in
this direction
1
3. Use a / " combination wrench and turn the
2
orifice hood at the base of the broil burner
clockwise until it is just snug (approximately
2- 1 / turns). NO NOT OVERTIGHTEN THE
2
HOOD.
1-15
4321891
Page 1-15
screw
hood
L.P. gas
decreases flame
size in this direction