Maintenance and Adjustment
Indicator Lights
Bulb
Replacement
Models
1
ccoa
1
Indicator Lens
2
Securing screw
The lens on each indicator light is
held in place by a securing screw
located in the body of the light.
Release the screw and remove the
lens to gain access to the bulb for
replacement.
102
Licence Plate Light
–
Both
Bulb Replacement – Daytona
955i
Remove the side panels.
Remove the rear light together with
its bracket.
2
Carefully remove the rubber bulb
holder from the back of the light unit
and detach the bulb.
To avoid cable damage, do not pull
the bulb holder using the cables.
Installation is the reverse of the
removal procedure.
Bulb Replacement – Speed
Triple
Carefully remove the rubber bulb
holder from the back of the number
plate light unit and detach the bulb.
To avoid cable damage, do not pull
the bulb holder using the cables.
Installation is the reverse of the
removal procedure.
Caution
Caution