Triumph Daytona 955i Handbook page 83

Warning
Ensure that the adjusters are set
to the same setting on both forks.
Settings which vary from left to
right could significantly change
handling characteristics leading to
loss of control and an accident.
Front Suspension Settings
2
1
ccoc
1 Spring pre-load
Daytona
2 Rebound damping
adjuster - Daytona
Maintenance and Adjustment
1
ccpv
1 Spring
Speed Triple
2 Rebound/compression damping
adjuster – Speed Triple (see
notes)
Spring Pre-Load Adjustment
– Both Models
The spring pre-load adjusters are
located at the top of each fork.
To change
adjuster -
rotate the adjuster clockwise to
increase pre-load, or anti-clockwise
force
to decrease pre-load. Always set the
pre-load adjusters such that there
are an equal number of graduation
lines visible on both forks.
NOTE
• The Daytona is delivered
from the factory with the
spring
position 5, the Speed Triple
at position 3.
2
pre-load adjuster –
the spring pre-load,
pre-load set at
83