Triumph Daytona 955i Handbook page 99

Headlight Adjustment - Vertical
1
ccqq
1 Vertical beam adjuster cover
fixings
The vertical beams of the left hand
and right hand headlights can only
be adjusted together. Independent
adjustment is not possible.
Switch the headlight dipped beam
on.
Remove the adjuster cover
Slacken the clamp bolt sufficient to
allow restricted movement of the
headlights.
Adjust the position of the headlights
to give the required beam setting.
Tighten the clamp bolt to 15 Nm.
Re-check the headlight
settings.
Switch the headlights off when both
beam settings are satisfactorily set.
Refit the adjuster cover.
Maintenance and Adjustment
Headlight
Horizontal
1
ccqr
1 Horizontal beam adjusters
The horizontal
headlights can
individually. The same procedure is
used to adjust either headlight.
Switch the headlight dipped beam
on.
Slacken the headlight bowl fixing.
Adjust the horizontal position of the
headlight to give the required beam
setting.
Tighten the clamp bolt to 15 Nm.
Repeat for the second headlight.
Re-check the
beam settings.
Switch the headlights off when both
beam settings are satisfactorily set.
Adjustment -
beams of both
be adjusted
headlight beam
99