Triumph Daytona 955i Handbook page 69

2
1
ccqs
Daytona
1 Opening cable adjuster
2 Closing cable adjuster
3 Closing cable –
measurement point
4 Opening Cable – free play
measurement point
Remove the seat(s).
Disconnect the battery,
(black) lead first.
Remove the fuel tank.
Release the locknuts
'opening' cable adjusters.
Rotate the 'opening' cable adjuster
at the twist grip end such that it has
an equal amount of adjustment in
each direction.
Rotate the 'opening' cable adjuster
at the throttle body end of the cable
to give 2-3 mm of play at the twist
grip. Tighten the locknut.
Make any minor adjustments as
necessary to give 2-3 mm of play
using the adjuster near the twist grip
Maintenance and Adjustment
3
3
1
Speed Triple
end of
locknut.
With the throttle fully closed, ensure
free play
that there is 2-3mm of free play in
the 'closing' cable at the throttle cam
attached to the throttle bodies. If
necessary, adjust at the throttle
body end in the same way as the
'opening' cable, until 2-3 mm of play
negative
is present.
on the
Ensure
locknuts
tightened, as a loose locknut could
result in a sticking throttle.
An incorrectly adjusted, sticking or
stuck throttle can lead to loss of
motorcycle
accident.
Refit the fuel tank.
Reconnect the battery, positive (red)
lead first.
Refit the seats(s).
4
2
Both Models
the cable. Tighten
Warning
that all the adjuster
of all cables
control and
the
are
an
69