Right Handlebar Switches - Triumph Daytona 955i Handbook

Warning
Do not attempt to adjust the
levers with the motorcycle
motion as this may lead to loss of
motorcycle control
accident.
After adjusting the levers, operate
the motorcycle in an area free
from traffic to gain familiarity with
the new lever setting. Do not loan
your motorcycle to anyone as they
may change the lever setting from
the one you are familiar with
causing loss of control or an
accident.
Right Handlebar
Switches
1
2
ccmh
1 Engine stop switch
2 Starter button
General Information
Engine Stop Switch
In addition to the ignition switch
being turned to the 'ON' position, the
engine stop switch must be in the
in 'run' position for the motorcycle to
operate.
and an
The engine
emergency use. If an emergency
arises which requires the engine to
be stopped, move the engine stop
switch to the stop position.
NOTE
• Although the engine stop
switch stops the engine, it
does not turn off all the
electrical circuits and may
cause difficulty in restarting
the
discharged
Ordinarily, only the ignition
switch should be used to
stop the engine.
Do not leave the ignition switch in
the 'ON' position unless the engine
is running as this may cause
damage to electrical components
and will discharge the battery.
Starter Button
The starter button operates the
electric starter. For the starter to
operate, the clutch lever must be
pulled to the handlebar.
stop switch is for
engine due to
battery.
Caution
35
a