Triumph Daytona 955i Handbook page 42

General Information
Tyres/Wheels: Correct
pressures (when cold). Tread depth/
wear, tyre/wheel damage, punctures
etc. (page 86).
Nuts, bolts, fasteners: Visually
check that steering and suspension
components, axles, and all controls
are properly tightened or fastened.
Inspect all areas for loose/damaged
fixings.
Steering Action: smooth but not
loose from lock to lock. No binding of
any of the control cables (page 79).
Brakes: Pull the brake lever and
push the brake pedal to check for
correct resistance. Investigate any
lever/pedal where the
excessive before meeting resistance,
or if either control feels spongy in
operation (page 75).
Brake pads: There should be more
than 1.5 mm of friction material
remaining on all the pads (page 75).
Brake Fluid Levels: No brake fluid
leakage. Brake fluid levels must be
between the 'max' and 'min' marks
on both reservoirs (page 77).
Front Forks: Smooth action. No
leaks from fork seals (page 81).
Throttle: Throttle grip free-play 2-3
mm. Ensure that the throttle grip
returns to the idle position without
sticking (page 67).
Clutch: Smooth operation
correct cable free-play (page 70).
Coolant: No coolant leakage. Check
the coolant level in the expansion
tank (when the engine is cold) (page
65).
42
inflation Electrical equipment: All
and horn function correctly (page
33).
Engine stop: Stop switch turns the
engine off (page 44).
Stands: Return to the fully up
position by spring tension. Return
springs not weak or damaged (page
39).
travel is
and
lights