Triumph Daytona 955i Handbook page 96

Maintenance and Adjustment
Headlight Adjustment
Each headlight can be adjusted by means of vertical and horizontal
adjustment screws located on the rear of each headlight.
2
ccoi
1 Vertical adjustment screw (LH)
2 Horizontal adjustment
(LH)
3 Vertical adjustment screw (RH)
4 Horizontal adjustment screw
(RH)
Switch the headlight dipped beam
on.
Turn the vertical adjustment screw
on each headlight clockwise to lower
the beam or anti-clockwise to raise
the beam.
96
1 3
On the right hand headlight turn the
horizontal adjustment clockwise to
screw
move the beam to the right or anti-
clockwise to move the beam to the
left.
On the left hand headlight turn the
horizontal adjustment screw anti-
clockwise to move the beam to the
right or clockwise to move the beam
to the left.
Switch the headlights off when the
beam settings are satisfactory.
4