Table of Contents
Advertisement
Chapter 3 Configuring the Tracer MP580/581
36
To configure security:
1. In the Active Device View, click the Unit tab. The status information
for the controller appears.
2. Click the Configuration button. The Configuration dialog box appears
with the Unit tab displayed.
3. Click the Security Setup button. The Security dialog box (Figure 26)
appears.
Figure 26. Security dialog box
4. In the User Name list, click the user name for which you want to set
up security.
5. If you want to change the user name, type the user's name in the User
Name field.
The user name can be up to 24 characters long.
6. In the User Password field, type a four-digit password.
The password can be only numbers; no letters or special characters
are allowed.
7. Click to select the Show Password check box to display the password
for the selected user name.
CNT-SVP01C-EN
Hide quick links:
Advertisement
Table of Contents
