Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings; Scan To A Memory Card Or Usb Flash Memory Drive; Entering Scan Mode - Brother MFC-790CW User Manual

Chapter 13
Setting your changes as a
new default
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press your new setting.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a or b to choose Set New Default.
c
Press Set New Default.
d
Press Yes to confirm.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press Print Setting.
b
Press a or b to display
Factory Reset.
c
Press Factory Reset.
d
Press Yes to confirm.
e
Press Stop/Exit.
112
Scan to a memory card
or USB Flash memory
13
drive

Entering Scan mode

When you want to scan to a memory card or
USB Flash memory drive, press
The LCD shows:
SCAN SCAN
Scan to
E-mail
Scan to
File
Press Scan to Media.
If you are not connected to your computer
only the Scan to Media selection is available
13
on the LCD.
(See Scanning for Windows
in the Software User's Guide on the CD-ROM
for details about the other menu options.)
(Scan).
Scan to Scan to
Image OCR
Scan to
Media
® ®
or Macintosh
13
13