Dpof Printing - Brother MFC-790CW User Manual

Chapter 13
• While the image is enlarged, you can
move around the image with up ( ),
down ( ), left ( ) and right ( ).
• Press Cancel to return to the list of
effects.
g
Adjust the red frame around your photo.
The part inside of the red frame will be
printed.
Press + or - to enlarge or reduce the
frame size.
Press a, b, d or c to move the
position of the frame.
Press to rotate the frame.
Press OK when you have finished
adjusting the frame setting.
Press OK to confirm.
Note
If your photo is very small or has irregular
proportions you may not be able to trim
the photo. The LCD will display
Image Too Small. or
Image Too Long.
h
Enter the number of copies you want
either by pressing the number box
directly and enter the number you want
or pressing + or -.
Press OK.
i
Do one of the following.
Press Print Setting and change
the print settings. (See page 107.)
If you do not want to change any
settings, press Colour Start to print.
106

DPOF printing

DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, Fuji Photo
Film Co. Ltd., Matsushita Electric Industrial
Co. Ltd. and Sony Corporation) created this
standard to make it easier to print images
from a digital camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
When the memory card (CompactFlash
®
Memory Stick , Memory Stick Pro™, SD,
SDHC or xD-Picture Card™) with DPOF
information is put into your machine, you can
print the chosen image easily.
a
Make sure you have put a memory card
in the correct slot.
The machine will ask you if you want to
use DPOF setting.
The DPOF file on the memory card must
be in a valid DPOF format.
b
Press Yes.
c
Do one of the following:
Press Print Setting to change
the print settings. (See page 107.)
If you do not want to change any
settings, press Colour Start to print.
Note
A DPOF File error can occur if the print
order that was created on the camera has
been corrupted. Delete and recreate the
print order using your camera to correct
this problem. For instructions on how to
delete or recreate the print order, refer to
your camera manufacturer's support
website or accompanying documentation.
13
®
,