Colour Enhancement - Brother MFC-790CW User Manual

Chapter 13

Colour Enhancement

You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a
Press Print Setting.
b
Press a or b to display
Color Enhance.
c
Press Color Enhance.
d
Do one of the following:
If you want to customize the White
Balance, Sharpness or Colour
Density, press On, and then go to
step e.
If you do not want to customize,
press Off.
Go to step h.
e
Press White Balance, Sharpness or
Color Density.
f
Press d or c to adjust the degree of the
setting.
Press OK.
g
Do one of the following:
If you want to customize another
colour enhancement, repeat
steps e to f.
If you want to change other settings,
press to display the print setting
menu and press the setting you want
to change. (See page 107.)
h
If you do not want to change additional
settings, press
Press Colour Start to print.
110
13
.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.