Brother MFC-790CW User Manual page 81

Changing the remote codes
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 5 1 (l 9 1 for
New Zealand). The preset Remote
Deactivation Code is # 5 1 (# 9 1 for New
Zealand). If you want to, you can replace
them with your own codes.
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display Remote Codes.
g
Press Remote Codes.
h
Press On (or Off).
i
Do one of the following.
If you want to change the Remote
Activation Code, enter the new code.
Press OK, go to step k.
If you do not want to change the
Remote Activation Code, press OK,
go to step j.
j
Do one of the following.
If you want to change the Remote
Deactivation Code, enter the new
code.
Press OK, go to step k.
If you do not want to change the
Remote Deactivation Code, press
OK, go to step k.
k
Press Stop/Exit.
Telephone and External devices
Note
7
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
3-digit code using the numbers 0-9, l, #.
• Remote Codes might not work with some
telephone systems.
7
69