Switching To Radio Mode; Selecting The Waveband / Memory Bank - Blaupunkt TravelPilot E1/E2 Operating Instructions Manual

INTRODUCTION NAVIGATION

Switching to radio mode

To switch to radio mode,
1 briefly press the FM•AM button 4.
The radio will play the station that it received last.

Selecting the waveband / memory bank

This device can receive programmes broadcast over the FM frequency range as
well as the MW and LW (AM) wavebands. There are three memory banks avail-
able for the FM range and one for each of the MW and LW ranges. Six stations
can be stored in each memory bank.
To switch between the memory banks or wavebands,
1 press the FM•AM button 4 repeatedly until the waveband or memory bank
that you want appears in the display.
1 press the OK button ;.
A list appears containing the wavebands / memory banks.
2 Mark the waveband or memory bank that you want and press the OK but-
ton ;.
The waveband or memory bank that you selected is displayed and the radio
plays the station that was tuned in last.
RADIO CD / MP3 CD CHANGER SETUP
FM1 NDR 2
NDR2
NJOY
TMC
RAD2
MEMORX BANK
FM1
FM2
TMC FMT
MW
APPENDIX
52
ffn
Ante
NAV
JUMP
NAV