Blaupunkt TravelPilot E1/E2 Operating Instructions Manual page 28

INTRODUCTION NAVIGATION
In smaller municipalities, it is possible that a postcode will cover several small
towns and villages. In this case you must select the appropriate place name
after entering the postcode. In general, entering the first letter of the place name
that you want will be sufficient. This will then appear next to the postcode in the
display.
Note: You can only enter destinations by way of the postcode if the
appropriate data are available on the navigation CD-ROM.
1 Mark and confirm the DESTination INPut menu item in the main navigation
menu and then mark and confirm the TOWN menu item.
The text input line for entering the town name appears and the town name
that was entered last is displayed.
Plus Point: The system automatically proposes the last entered town name
for the new destination. You can accept this proposal by pressing and hold-
ing down the OK button ; or by pressing the
are stored by the TravelPilot E2. If you enter the first letters of a destination
and they match the first letters of one of the last 20 towns, the system will
display the corresponding town name. If there is no match, the first suitable
entry from the town list will be displayed.
2 Enter the place name using the text input line. (For further information, read
the section entitled " E ntering destinations using the text input line" ) .
3 Switch to the list.
The name is displayed in the list of destination places.
4 Select the town that you want and press the OK button ; to accept the town
as your destination.
The system then accepts the town as the destination.
RADIO CD / MP3
button 8. The last 20 towns
CD CHANGER SETUP
SELEC=
SUPRAREG.D
TOWN
TMC
POS. AREA
DESTN AREA
=OWN
BERLIN
TMC
EG
=OWN
BERLIN [D]
TMC
APPENDIX
28
NAV
[D]
NAV
,C
NAV