Switching To Radio Mode; Selecting The Waveband (Band)/ Memory Bank; Tuning Into A Station; Adjusting The Sensitivity Of The Station Seek Tuning (Sensitivity) - Blaupunkt Seattle MP57 Operating And Installation Instructions

Switching to radio mode

If you are in CD, MP3, CD changer or AUX
mode,
u press the BAND button ?.
or
press the SOURCE button 4 repeat-
u
edly until "TUNER" appears on the dis-
play.
Selecting the waveband ( Band)/
memory bank
This device can be used to receive stations
in the FM and AM frequency bands. 3 mem-
ory banks (FM1, FM2 and FMT) are avail-
able for the FM waveband and 2 memory
banks (AM and AMT) for the AM waveband.
Six stations can be stored in each memory
bank.
To switch between the wavebands FM and
AM,
u press the BAND button ?.
The "Tuner" menu is displayed.
u Press the softkey "Band" 7 in FM
mode or 6 in AM mode.
The "Band" menu for the selection of the
waveband is displayed.
u Press the softkey "FM" 6 or "AM" 7.
The radio changes to the selected wave-
band.
To switch between the memory banks FM1,
FM2 and FMT in the FM waveband or be-
tween AM and AMT in the AM waveband,
u press the NEXT button 2.

Tuning into a station

There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
u
Press the or
The radio tunes into the next receivable sta-
tion.
Tuning into stations manually
You can also tune into stations manually.
To change the set frequency in small incre-
ments,
u
briefl y press the
To change the set frequency quickly,
u
press and hold down the
> for a longer period of time.
Adjusting the sensitivity of the
station seek tuning (Sensitivity)
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception. The sensitivity
can be adjusted from 1 (low) to 6 (high).
u Press the BAND button ?.
The display shows the fi rst page of the
"Tuner" menu.
u
Change to the second page of the
"Tuner" menu by pressing the NEXT
button 2.
u Press the softkey "Sensitivity" 8 re-
peatedly until the desired sensitivity
level is displayed behind "Sensitivity".
Radio mode
button @.
or button >.
or button
17