Scanning All The Tracks In A Directory (Scan); Repeating Tracks (Repeat) - Blaupunkt TravelPilot E1/E2 Operating Instructions Manual

Scanning all the tracks in a directory (SCAN)

If you briefly want to play (scan) all the tracks in the current directory, proceed
as follows:
1 Press and hold down the OK button ; for longer than 2 seconds.
All the tracks in the directory are scanned in ascending order. The scanning
time is 10 seconds.
To cancel the SCAN function,
1 press the ESC button =. The SCAN function is cancelled automatically if
you activate the MIX function.

Repeating tracks (REPEAT)

You can make the system repeat playback of the current track or all the tracks in
a directory.
1 Press the 5 RPT station button >.
RPT TRACK appears in the display.
To repeat all the tracks in the directory,
1 press the 5 RPT station button > repeatedly until RPT DIR appears in the
display.
The tracks in the directory are played repeatedly.
To cancel the repeat function,
1 press the 5 RPT station button > repeatedly until MP3 appears again on the
top line of the display.
INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER SETUP
67
APPENDIX