Table of Contents
Advertisement
Radio operation
This car audio system has been
equipped with an RDS radio receiver.
Many FM radio stations now transmit
the RDS signal, which contains such
other information as the station name
and the program type (PTY) along with
their regular station programming.
As soon as the car radio receiver de-
tects the station name, it will appear in
the display. It is also possible to display
the program type. For more information,
refer to the section on "Program Type
(PTY)".
Switching to the radio mode
If you are currently using the tape deck
or CD changer,
press CD•C @ repeatedly until
"RADIO" appears in the display.
Special RDS functions (AF, REG)
The special RDS functions for AF (Al-
ternate Frequency) and REG (Region-
al) improve the performance of your car
radio.
AF. If this RDS function is activated,
the car radio continuously searches
in the background for the frequency
with the best reception for the sta-
tion you have tuned into.
REG. A number of radio stations
broadcast different regional pro-
gramming at different times of the
day. Use REG to prevent your car
radio from tuning into alternate fre-
quencies which might have differ-
ent programming.
RADIO OPERATION
Note:
It is necessary to activate/deactivate
REG in the menu.
Switching REG on/off
Press MENU 8.
: repeatedly until "REG"
Press
appears in the display. "OFF" or
"ON" will appear next to "REG".
: to switch REG off
Press
or
or on.
Press MENU 8 or OK ;.
Switching RDS functions on/off
To take advantage of the RDS
functions for AF and REG, press
RDS 4.
When the RDS functions have been
activated, "RDS" will light up as a sym-
bol in the display. When you activate
RDS functions, "REG ON" or "REG
OFF" will appear briefly in the display.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM, MW
and LW (AM) wavebands. There are
three memory banks for the FM wave-
band and one memory bank each for
MW and LW.
You can store six stations in each of
these memory banks.
To switch between the different FM
memory banks or wavebands,
press BND / TS 5.
37
Advertisement
Table of Contents
