Radio Mode; Switching To Radio Mode; Setting The Tuner; Selecting The Frequency Band/ Memory Bank - Blaupunkt Daytona Beach C34 Operating And Installation Instructions

Radio mode

Switching to radio mode

If you are listening to Cassette or CD
changer (AUX) mode,
➮
press the BND-TS button 4.
or
➮
keep pressing the SRC : button
until "FM" or "AM" ("MW") appears
in the display.

Setting the tuner

In order to guarantee the perfect
functioning of the radio element, the unit
must be set for the region in which you
are located. You can choose between
Europe (EUROPE), America (USA),
Thailand (THAI) and South America
(S-AMERICA). The tuner comes from
the factory set for the region in which
the unit was sold. Should you encounter
problems with radio reception, please
check this setting.
➮
Press the MENU button 8.
➮
Press the fi button 7 repeatedly
until "TUNER" appears on the
display.
➮
Keep pressing the @ or # button
7 until the desired region appears
in the display.
When you have finished making your
changes,
➮
press the MENU button 8 twice.
Selecting the frequency band/
memory bank
This unit can receive programs
broadcast over the FM, AM (MW) and
LW frequency band. There are three
preset memory bank for the FM range
and one for the AM (MW) and one for
the LW range. Six stations can be stored
on each memory bank.
Note:
LW is not available for the "USA"
G
and "THAI" tuner settings.
Selecting the FM memory level or
the AM (MW) and LW frequency
ranges respectively
➮
Keep pressing the BND-TS button
4 to switch between the FM
memory levels (FM1, FM2 and
FMT) and the AM (MW) and LW
frequency ranges respectively.

Tuning into a station

There are various ways of tuning to a
station.
Automatic seek tuning
➮
Press the fi or % button 7.
The unit tunes to the next receivable
station.
Setting the sensitivity of station
seek tuning
You can choose whether to tune only
to strong reception stations or to also
tune to those with a weak reception.
➮
Press the MENU button 8.
➮
Keep pressing the fi or % button
7 until "SENS HI" or "SENS LO"
appears in the display
RADIO MODE
11