Entering A Destination - Centre - Blaupunkt TravelPilot E1/E2 Operating Instructions Manual

INTRODUCTION NAVIGATION
Crossroads
If you selected the JUNCTION menu item, a list of road junctions and crossroads
that are available on the destination street will be displayed.
Note: If a crossroads or junction appears twice, the system will also
display the compass direction.
1 Mark and confirm the crossroads that you want in the list.
The selected destination is displayed.
2 You can now start navigation using the OK button ;.
Plus Point: After you have finished entering the destination and before start-
ing navigation, you have the option of storing the destination in the destina-
tion memory. For further information, read the section entitled " D estination
memory" .
You can specify route options in order to customise the route to suit your partic-
ular requirements, e.g. excluding motorways. For further information, read the
section entitled " D efining route options" in this chapter.
Entering a destination – Centre
If after entering the town name you selected the TOWN CENTRe menu item, the
text input line will be displayed so that you can select a town centre.
1 Enter the centre using the text input line.
The available town centres are displayed depending on the amount of infor-
mation you have already entered.
Note: If you selected the place name by entering the postcode, the
system will only offer you a selection of town centres that are rele-
vant for the postcode that you entered.
2 Switch to the list and select the centre of the town district that you want.
Then confirm your choice.
RADIO CD / MP3 CD CHANGER SETUP
SELEC=
HOUSE NUMB
JUNCTION
TMC
CONTINUE
SELEC=
POI
STREET
TMC TOWN CENTR
=OWN CEN=RE
CHARLOTTEN
BURG [D]
TMC
APPENDIX
32
NAV
NAV
NAV