Manual Device Calibration - Blaupunkt TravelPilot E1/E2 Operating Instructions Manual

INTRODUCTION NAVIGATION

Manual device calibration

You can also manually calibrate the device. You will be required to drive a route
of at least 110 yards (100 metres) to 550 yards (500 metres) at a maximum
speed of 18 mph (30 km/h). Please note that you must drive along a route that
has been measured as precisely as possible.
1 Mark and confirm the MANual CALIBration menu item.
You will now be asked to enter the length of the route that you want to drive.
2 Use the menu knob : to enter the route length and then press the OK
button ;.
3 Start manual calibration by pressing the OK button ;.
4 Once you have driven the relevant distance, press the OK button ;.
Manual calibration is complete.
Cancelling manual calibration
You have the option of cancelling the procedure at any time. If you want to
cancel calibration,
1 press the ESC button =.
The previous on-screen item is then displayed.
RADIO CD / MP3 CD CHANGER SETUP
ins=all
INST. TEST
AUTO CALIB
TMC
MAN. CALIB
MANUAL Calib
DISTANCE
TMC
2OO
APPENDIX
92
NAV
NAV
yds