The Front Leds - Billion BiPAC 7402(G)X(L) Series User Manual

The Front LEDs

LED
1 Power
LAN Port
2
1X - 4X
(RJ-45 connector)
3 USB
Wireless(Wireless
4
Router only)
5 Mail
6 DSL
7 Internet
Chapter 2: Installing the router
Both red and green LEDs lit together when power is ON.
Lit red means system failure. Restart the device or contact support.
Lit green when the device is ready.
Lit when one of LAN ports connected to an Ethernet device.
The speed of transmission hits 100Mbps appears Green; The speed of
transmission hits 10Mbps appears Orange.
Blinking when data is Transmitted / Received.
Lit when the device connected to a USB device.
Flash when the device is sending/receiving data.
Lit green when the wireless connection is established.
Flashes when the device is sending/receiving data.
Flash once per second while wi-fi protected setup is in progress.
Lit green when there are emails in the Inbox.
Lit Green when the device is successfully connected to an ADSL
DSLAM. ("line sync").
Lit red when WAN port fails to get IP address.
Lit green when WAN port gets IP address successfully.
Lit off when the device is in bridge mode or when WAN connection is
absent.
Meaning

5