LAN - Local Area Network
Here are the items within the LAN section:
Ethernet Client Filter, Wireless, Wireless Security, Wireless Client Filter, WPS, Port Setting
DHCP
Server.
Bridge Interface
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two
VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4). Uncheck P2, P3, P4 from Ethernet VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
Bridge Interface
ethernet
ethernet1
ethernet2
ethernet3
Management Interface: To specify which VLAN group has possibility to do device management, like
doing web management.
Note: NAT/NAPT can be applied to management interface only.
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
Bridge Interface, Ethernet, IP Alias, IPv6 Autoconfig,
VLAN Port (Always starts with)
P1 / P2 / P3 / P4
P2 / P3 / P4
P3 / P4
P4
and
40