Chapter 3: Basic Installation - Billion BiPAC 7402(G)X(L) Series User Manual

The router can be configured with your web browser. A web browser is included as a standard application
in the following operating systems: Windows 7, Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The
product provides an easy and user-friendly interface for configuration.
Please check your PC's network components. The TCP/IP protocol stack and Ethernet network adapter
must be installed. If not, please refer to your Windows-related or other operating system manuals.
There are ways to connect with the router, either through an external repeater hub to the router or directly
connecting with PCs. However, to be sure PCs have an Ethernet interface installed properly prior to
connecting to the router device. You ought to configure your PCs to obtain an IP address through a DHCP
server or a fixed IP address that must be in the same subnet as the router. The default IP address of the
router is 192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC must be in the same
subnet, and have an IP address in the range of 192.168.1.1 to 192.168.1.253). The best and easiest way
is to configure the PC to get an IP address automatically from the router using DHCP. If you encounter
any problem accessing the router's web interface it may also be advisable to uninstall any kind of
software firewall on your PCs, as they can cause problems accessing the 192.168.1.254 IP address of
the router. Users should make their own decisions on how to best protect their network.
Please follow the steps below for your PC's network environment installation.

Chapter 3: Basic Installation

Any TCP/IP capable workstation can be used to communicate with
or through the router. To configure other types of workstations,
please consult the manufacturer's documentation.
(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 3: Basic Installation
8