Url Filter - Billion BiPAC 7402(G)X(L) Series User Manual

URL Filter

URL (Uniform Resource Locator - e.g. an address in the form of
http://www.example.com) filter rules allow you to prevent users on your network from accessing particular
websites by their URL. There are no pre-defined URL filter rules; you can add filter rules to meet your
requirements.
Enable/Disable: To enable or disable URL Filter feature.
Block Mode: It can support up to 4 timeslots.
Disabled: No action will be performed by the Block Mode.
Always On: Action is enabled. URL filter rules will be monitoring and checking at all hours of the day.
TimeSlot1 ~ TimeSlot16: It is self-defined time period. You may specify the time period to check the
URL filter rules, i.e. during working hours. For setup and detail, refer to Time Schedule section.
Keywords Filtering: Allows blocking by specific keywords within a particular URL rather than having to
specify a complete URL (e.g. to block any image called "advertisement.gif"). When enabled, your
specified keywords list will be checked to see if any keywords are present in URLs accessed to determine
if the connection attempt should be blocked. Please note that the URL filter blocks web browser (HTTP)
connection attempts using port 80 only.
example, if the URL is http://www.abc.com/abcde.html, it will be dropped as the keyword "abcde"
For
occurs in the URL.
Domains Filtering: This function checks the whole URL not the IP address, in URLs accessed against
your list of domains to block or allow. If it is matched, the URL request will be sent (Trusted) or dropped
(Forbidden). For this function to be activated, both check-boxes must be checked. Here is the checking
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
http://www.abcde.com or
101