Billion BiPAC 7402(G)X(L) Series User Manual page 101

(802.11g) ADSL2+ (VPN) Firewall Router
Example:
Application: Cindy_HTTP
Time Schedule: Always On
Source / Destination IP Address(es): 0.0.0.0
(I do not wish to active the address-filter, instead I use
the port-filter)
Type: TCP (Please refer to Table1: Predefined Port Filter)
Source Port: 0-65535
(I allow all ports to connect with the application))
Redirect Port: 80-80
(This is Port defined for HTTP)
Inbound / Outbound: Allow
4. The new port filter rule for HTTP is shown below:
Configure your Virtual Server ("port forwarding") settings so that incoming HTTP requests on port 80 will
be forwarded to the PC running your web server:
Note: For how to configure the HTTP in Virtual Server, go to Add Virtual Server in Virtual Server section for more
details.
98
Chapter 4: Configuration