Billion BiPAC 7402(G)X(L) Series User Manual page 39

(802.11g) ADSL2+ (VPN) Firewall Router
4. The list below has different mode applied for your choice. Choose 0/33/PPPoE (Recommended) and
click Apply.
5. Please enter "Username" and "Password" as supplied by your ISP (Internet Service Provider) and
click Apply to continue.
Profile Port: Select the connection mode. There are ADSL EWAN and 3G.
Protocol: Select the protocol mode. The default mode is PPPoE.
VPI/VCI: Enter the VPI and VCI information provided by your ISP.
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Service Name: This item is for identification purposes. If it is required, your ISP provides you the
information.
Authentication Protocol: Default is Auto. Your ISP advises on using Chap or Pap.
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to obtain automatically an IP address from your
ISP.
36
Chapter 4: Configuration