Billion BiPAC 7402(G)X(L) Series User Manual page 161

SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2 security.
The "c" comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm for "security",
but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorization with fine granularity for remote monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
From RFC 1213 (MIB-II):
 System group
 Interfaces group
 Address Translation group
 IP group
 ICMP group
 TCP group
 UDP group
 EGP (not applicable)
 Transmission
 SNMP group
From RFC1650 (EtherLike-MIB):
 dot3Stats
From RFC 1493 (Bridge MIB):
 dot1dBase group
 dot1dTp group
 dot1dStp group (if configured as spanning tree)
From RFC 1471 (PPP/LCP MIB):
 pppLink group
 pppLqr group (not applicable)
From RFC 1472 (PPP/Security MIB):
 PPP Security Group)
From RFC 1473 (PPP/IP MIB):
 PPP IP Group
From RFC 1474 (PPP/Bridge MIB):
 PPP Bridge Group
From RFC1573 (IfMIB):
 ifMIBObjects Group
From RFC1695 (atmMIB):
 atmMIBObjects
From RFC 1907 (SNMPv2):
 only snmpSetSerialNo OID
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
158