Billion BiPAC 7402(G)X(L) Series User Manual page 48

Channel ID: Select the wireless connection ID channel that you would like to use.
Note: Wireless performance may degrade if select ID channel is already being occupied by other AP(s).
TX PowerLevel: It is a function that enhances the wireless transmitting signal strength. User may adjust
this power level from minimum 1 up to maximum 127.
Note: The Power Level maybe different in each access network user premises environment and choose
the most suitable level for your network.
Connected: Representing in true or false. That it is the connection status between the system and the
build-in wireless card.
AP MAC Address: It is a unique hardware address of the Access Point.
AP Firmware Version: The Access Point firmware version.
WMM: This feature works concurrently with QoS that enables the system to prioritize the flow of data
packets according to 4 categories: Voice, Video, Best Efforts and Background.
 Enable: Click to activate WMM feature.
Disable: Click to deactivate WMM feature.

Wireless Distribution System (WDS)
It is a wireless access point mode that enables wireless link and communication with other access point.
It is easy to be installed simply to define peer's MAC address of the connected AP. WDS takes
advantages of cost saving and flexibility which no extra wireless client device is required to bridge
between two access points and extending an existing wired or wireless infrastructure network to create a
larger network. It can connect up to 4 wireless APs for extending cover range at the same time.
In addition, WDS enhances its link connection security in WEP mode, WEP key encryption must be the
same for both access points.
WDS Service: The default setting is Disabled. Check Enable radio button to activate this function.
1. Peer WDS MAC Address: It is the associated AP's MAC Address. It is important that your peer's AP
must include your MAC address in order to acknowledge and communicate with each other.
2. Peer WDS MAC Address: It is the second associated AP's MAC Address.
3. Peer WDS MAC Address: It is the third associated AP's MAC Address.
4. Peer WDS MAC Address: It is the fourth associated AP's MAC Address.
Note: For MAC Address, Semicolon ( : ) must be included.
Chapter 4: Configuration
(802.11g) ADSL2+ (VPN) Firewall Router
45