Billion BiPAC 7402(G)X(L) Series User Manual page 58

(802.11g) ADSL2+ (VPN) Firewall Router
Adding a new WPS device (wireless client) to a network - Use PBC Method
Step 1: Push AP's WPS button more than one second and you will see AP's WLAN led will flashing per
second.
Step 2: Open wireless client's WPS utility, select "Join a wireless network" and apply "next" button.
Note: After you push AP's WPS button, below steps should be completed between 2 minutes.
Step 3: Select "Push the button on my access point" and apply "next" button.
55
Chapter 4: Configuration