Last Destinations; Using Last Destinations; Starting With Existing Destination; Displaying Or Editing A Destination - Becker MAP PILOT Instructions For Use Manual

Last destinations

In the last destinations, the most recent
destinations and stored destinations are
displayed and can be selected directly.
> Select
from the main
Last destinations
menu.
If you have already entered your home ad-
dress, you can start route guidance to your
home address in the last destinations
( ).
Home
The destination list containing the desti-
nations most recently traveled to as well as
stored destinations is displayed in the lines
below this.
Note:
Up to 200 of the most recent destinations
are automatically stored in the destina-
tion list. If the storage capacity is reached,
the oldest destination is automatically de-
leted to make room for a new destina-
tion. However, important destinations
can be protected.
Protected entries are identified by the
symbol.
If you select your home address and it has
not yet been defined, you will be request-
ed to enter the address.
NAVIGATION MODE

Using last destinations

Starting with existing destination

The destinations available in the last des-
tinations are included in the destination
list.
> Select the desired entry from the list us-
ing the rotary control/push button to
start route calculation.
The calculation begins. When the calcula-
tion is complete, the map appears and the
route guidance begins.

Displaying or editing a destination

Any destination stored in the last destina-
tions can be displayed and edited.
> Highlight the desired entry using the
rotary control/push button.
> Push the rotary control/push button to
the right.
>>>
> USE
> FR
> ES
18