Selecting A Province; Selecting An Address And Starting Route Guidance - Becker TRAFFIC STAR NAVIGATION Operating Manual

>>> NAVIGATION MODE

Selecting a province

> ZH
Note:
If a province of destination has already
> EN
been entered it will remain until you se-
lect a different province.
> Select the entry containing the province
of destination.
> Select the first letters of the destination
province.
The selection list will appear.
> Select the desired province.
20
Selecting an address and starting route
guidance
The following settings can be made in the
address input menu:
• City
• District
• Postal code
• Street and house number
• Intersections as an orientation aid
It is also possible to:
• start the route guidance straight away.
• search for a point of interest near to the
address entered (
POI search
be entered as described under "POI
near address" on page 25.
• save the destination with name in the
last destinations.
• show the route on the map.
Selecting a city
The destination city can be specified by
entering the name or postal code.
When you select the letters of a city, the
Becker® TRAFFIC STAR NAVIGATION
displays suggestions. If you do not wish to ac-
cept the suggestion simply select the subse-
quent letters of the desired city.
The Becker®
NAVIGATION excludes all impossible
letter combinations and postal codes and
activates only those letters and numbers
that could give the name of an existing
city or postal code.
). This can
> Select the letters of the destination city
or the numbers of the postal code con-
secutively.
When sufficient letters have been entered
it will automatically switch to a list from
which you can select the city. However,
you can switch to the list before this by
pushing the MINI joystick backwards.
You can then select the city from the list.
TRAFFIC STAR