Table of Contents
Advertisement
Barco recommends to switch DPMS on to prevent image burn-in
(image retention) on the LCD panel.
Information menu
Information
Name
Product
Serial No
SW Number
SW Version
Display Runtime
Backlight Run-
time
Changing the viewing mode
About viewing modes
The display contains two viewing modes. Diagnostic viewing mode
provides the full calibrated luminance. This mode is intended for using
the display in diagnostic applications.
In Text mode, the luminance is approximately half of the luminance in
Diagnostic mode. This is intended for using the display with office
applications such as word processing.
Switching viewing modes by means of the keys
While the OSD is not on the screen, touch the Up
touch keys at the same time. As a result the display switches to
another viewing mode. The viewing mode is indicated by a message
that appears for a few seconds after switching the viewing mode.
Description
The display type
Indicates the display serial number
The order no. of the internal software
Displays the current internal software version
Indicates the total time the display has been
operating, including the time in stand-by
Indicates the total time the display has been
operating, excluding the time in stand-by
Display information
and Down
31
Advertisement
Table of Contents
