Driver Re-Installation, Updates Or Removal; Reinstalling Or Updating Your Barcomed Nio Driver - Barco Nio medical display systems Installation & User Manual

Driver re-installation, updates or removal

Driver re-installation, updates or removal

Reinstalling or updating your BarcoMed Nio driver

Note: These instructions apply to Windows 2000 and Windows
XP.
Important for Windows 2000 or Windows XP users only: If you
previously uninstalled the driver, do not allow the Windows Plug
and Play software to reinstall the driver for you.
To reinstall or update only the BarcoMed Nio driver, follow the
steps described in the section "Using the BarcoMed Product
Installation Wizard" with the following changes.
1. Boot your system, and log in using an account with
administrator privileges.
2. Insert your B
CD drive. If the "BarcoMed Product Installation Wizard"
doesn't start within one minute, browse the contents of your
B M
ARCO
"Setup.exe" to start the wizard.
The wizard will begin by displaying the screen shown in
figure 59 below.
120
M N
ARCO ED IO
N Software CD and double click on the file:
ED IO
Figure 59
Software CD into your computer's