Table of Contents
Advertisement
Cleaning
Precautions
•
Take care not to damage or scratch the glass or LCD panel.
•
Do not apply pressure on the glass or LCD panel.
•
Do not apply or spray liquid directly to the glass, panel or
cabinet as excess liquid may cause damage to internal
electronics. Instead, apply the liquid to the cleaning cloth.
•
DO NOT USE:
- Lye or cleaning solutions containing lye*
- Acid
- Detergents with fluoride
- Detergents with ammonia
- Detergents with abrasives
- Steel wool
- Sponge with abrasives
- Cloth with thread made of steel
- Other coarse tools
*(Lye is a strong caustic alkaline solution of potassium salts.)
Panel
Important:
We recommend to let this cleaning procedure be done in a Barco
service center. If not, you must perform the cleaning in a clean
and dust-free environment.
1. If there are dust particles on the LCD panel, blow them away
by using a dust remover. E.g., DUST OFF 67 (KONTAKT
Chemie).
A dust remover is composed of a blend of compressed liquid
gases functioning as propellant. They provide a jet of dry
inert gas that acts like compressed air for a quick and safe
109
Hide quick links:
Advertisement
Table of Contents
