Advertisement
How to....
Select the desired PiP2 input from the list of available video input
7.
sources. See also the note below.
Note: When selecting the video input for PiP2, some inputs may
not be available, depending on the chosen PiP1 input.
If you wish to adjust the image in the PiP2 frame, select Toggle
8.
PiP. As a consequence, the video signal from PiP2 now becomes
PiP1. This is necessary because the functions in the Adjustments
menu always affect the image in PiP1 only.
Go back to the Adjustments menu and adjust aspect ratio,
9.
brightness, contrast, color, hue and sharpness as desired like in
steps 3 and 4.
Go back to the PiP menu and select Toggle PiP again to switch the
10.
second video signal back to PiP2 again.
Adjust Size (scales the PiP frame proportionally), H Pos and V Pos
11.
for PiP2.
If desired, select a border color for the PiP2 frame.
12.
If necessary, select PiP order to change the PiP stacking order.
13.
If desired, select PiP layout name to change the name of the PiP
14.
layout.
Select Store layout to save the changed layout in the memory.
15.
Note: It is possible to select the same video input for both PiP
frames. However, it is difficult to give them different image
adjustments, as both frames will get the same adjustments every
time you select Toggle PiP.
34
Advertisement
