Advertisement
Adjustments
Adjustments
Adjustments menu
In this menu you can perform a number of image adjustments.
Note: When picture-in-picture (PiP) is active, the adjustments
will affect the PiP1 video frame only. If you wish to adjust the
video signal in the PiP2 frame, toggle the PiP frames in the PiP
menu so that the signal from frame2 is displayed in frame1. Then
make the adjustments (the PiP2 frame disappears while in
Adjustment menu) and finally toggle the PiP frames again.
Item
Brightness
Contrast
Color
Hue
10
Adjusts the image brightness. This means all lumi-
nance levels from black to white are adjusted.
Brightness and contrast are factory-adjusted to
obtain a maximum dynamic range.
Adjusts the image contrast. This means the black
level remains constant and the white levels are
adjusted, changing the luminance difference
between black and white.
Brightness and contrast are factory-adjusted to
obtain a maximum dynamic range.
Adjusts the color saturation.
Adjusts the hue. Do not use the Hue adjustment to
change the image color temperature. The Hue
adjustment is applicable only to correct phase
errors in NTSC video sources. This is an adjustment
for advanced users.
For color temperature adjustment, refer to the
Advanced menu.
Description
Advertisement
