Advertisement
Item
Noise reduction
Sharpness
Autosetup
Restore Current
Preset
Scaling
Adjust scaling
Aspect ratio
Adjust Aspect
Ratio (ASR)
Autosetup submenu
Use this menu to perform an automatic adjustment. This menu is
available only when an analog video input is selected.
There are 4 different ways to perform an autosetup.
It is very important to display a proper test pattern while performing
these functions. The requirements for the test pattern are described in
the table below.
Adjust this in case the selected video source
exhibits unwanted noise. Note that this adjust-
ment reduces noise but also reduces image sharp-
ness.
Adjusts the image sharpness.
Takes you to the autosetup submenu (see below)
Takes you to the restore current preset submenu
(see below).
Takes you to the scaling submenu (see below).
This function is visible only when Adjustable scal-
ing is selected.
Use this function to adjust the scaling manually.
The picture size will be controlled proportionally.
Takes you to the aspect ratio submenu (see
below).
This function is visible only when Adjustable
aspect ratio is selected.
Use this function to adjust the aspect ratio manu-
ally. The picture width will be controlled whereas
the picture height remains unchanged. To adjust
picture height as well, you must adjust Scaling.
Description
Adjustments
11
Advertisement
