Advertisement
Setup
Item
OSD timeout
RS232 baudrate
Quick input
selection
Power LED
Power save
User controls
OSD menu
Key Sound
26
Takes you to the OSD timeout submenu (see
below).
Takes you to the RS232 baudrate submenu (see
below).
Use Enter
to enable or disable the quick input
selection feature. When enabled, you can use the
navigation keys
OSD is on the screen.
Use Enter
to switch the (green) power LED on
or off. The (orange) stand-by LED is not influenced.
Use Enter
to switch the power save system on
or off. When switched on, the display will auto-
matically switch off when the connected video
signal falls away (e.g., computer goes in stand-
by).
Use Enter
to switch the user controls on or off.
When switched off, the user controls cannot be
used to display and use the OSD.
When the user controls are disabled, you can
enable them again by pressing the
simultaneously for 5 seconds. Then navigate to the
Setup menu and switch User controls on again.
Use Enter
to disable/enable the OSD. When
disabled, the OSD will not appear when touching
the control keys. Only the quick input selection
and stand-by functions are enabled.
When the OSD is disabled, you can enable it again
by pressing the
5 seconds. Then navigate to the Setup menu and
switch OSD menu on again.
Use Enter
to disable/enable the key sound (a
short beep sound) when touching the user control
panel keys.
Description
or
to switch inputs while no
and
keys simultaneously for
and
keys
Advertisement
