Some Generalities In Advance - Proxxon FF 500 CNC Commissioning Manual

1. Some generalities in advance...

Dear Customer!
The information given in this manual and the knowledge it conveys is indispensable
for the safe commissioning and the safe operation of the machine and the controls!
Before you set up and commission your machine, please read through the manual
and make sure you have understood everything. This is a very complicated device
which poses the danger of injury or can cause damage to property if handled
improperly.
Help to prevent this and familiarise yourself thoroughly with the machine and its
associated electronics without rushing matters.
The use of these instructions
makes it easier to become acquainted with the device,
-
prevents malfunctions due to improper handling, and
-
increases the service life of your device.
-
Always keep these instructions close to hand.
Only operate this device with exact knowledge of it and comply with these
instructions.
PROXXON will not be liable for the safe function of the device for:
handling that does not comply with the usual intended use,
-
other application uses that are not stated in these instructions,
-
disregard of the safety regulations.
-
You will not have any warranty claims for:
operating errors,
-
lack of maintenance.
-
For your safety, please comply with the safety regulations without fail.
Only use original PROXXON spare parts.
All rights reserved for further developments within the meaning of technical progress.
We wish you much success with the device.
4 of 55