Cleaning And Care - Proxxon FF 500 CNC Commissioning Manual

To properly apply the lubricant, use an oil can or a lint-free cloth saturated with oil or
grease. Please, treat the guides and all moving and blank parts in the same manner.
Please, also comply with the instructions of the lubricant manufacturers!

14.5. Cleaning and care

Caution!
Always disconnect the mains plug before any cleaning, adjusting, maintenance or repair!
Risk of injuries!
Note:
The machine is primarily maintenance free. For a long service life, clean the device after
every use from swarf and other processing residues.
Make expedient use of a hand broom, a brush or a (lint-free) cloth.
can also be recommended.
Please ensure that swarf does not get into the guides or other moving parts!
Therefore, never blow off the machine using compressed air: Dust and above all
swarf can be blown into guides or other moving parts and damage them!
When using cleaning agents, make sure the saturated wiping cloths are disposed of
in an environmentally-compliant manner. Do not dispose of in household waste.
B
A
A
B
A
A
A
A vacuum cleaner
37 of 55