Accessories - Proxxon FF 500 CNC Commissioning Manual

13. Accessories

Commercially available milling cutters with a maximum shaft diameter of 12 mm and
a tool diameter of approx. 40 mm can be used. For an optimal working result, it is
necessary to adapt the milling cutter as well as the milling parameters (feed, milling
depth, rotational speed) to the working conditions and to make a choice from these.
Naturally, this includes observing the table on the V-belt cover of the milling cutter.
We recommend the milling inserts from our accessories program, such as the end
mill cutter set (2-5 mm) 24610 or - for larger work - the end mill cutter set (6-10 mm),
article no. 24620.
Gears with the module m=0.5 can be milled using the tooth form cutters from our
accessories program; teeth numbers from 12-54 can be realised.
You will find further suitable milling and drilling tools in PROXXON quality from our
comprehensive program in specialist shops. They will be able to recommend a
suitable PROXXON product for your special application case.
33 of 55