Table of Contents
Advertisement
If an error message appears instead of the
"Manual control" window, the interface may be
incorrectly set.
To remove the error, it is usually sufficient to
readjust the interface in the "Parameters"
menu. First click "Machine" and then "Edit
parameters".
The window shown in the figure on the right
appears. Select the serial port as shown (COM
1) and then try again.
The program must be ended first and then
restarted. If it still does not want to function,
please review the notes in the chapter "Errors
and their removal".
11.2. Semi-automatic operation: Traversing the CNC axes with the
cursor keys
Please note: This operation mode is just
possible
to
proceed
with
open
"Manual
operation" window, as shown on the right. (Klick
"Machine" in the main menue, then "Milling
machine", after that the window must appear)
The option of working in "Semi-Automatic" mode
is also available: The individual axes can be
traversed by pressing the cursor keys and the
page up and/or page down keys:
Pressing the cursor keys adjusts the cross table
in the level (i.e. the X and Y axes are addressed)
meaning precisely in the sense of direction in
which they are also arranged on the keyboard.
The milling head can be vertically adjusted (Z
axis) using the page up and/or page down keys:
Pressing the page up key will move the milling
head up, and pressing the page down key
moves it down.
25 of 55
Hide quick links:
Advertisement
Table of Contents
