Advertisement
Quick Links
SERVICE AND REPAIR
Your device does not work properly? Please read the operating in-
structions again carefully. If the unit is in fact defective, please
send it to:
Prox-Tech, Inc.
Attn.: PROXXON Service Center
2555 Tate Blvd. S.E.
?
PO Box 1909
Hickory, NC 28603-1909
Please make sure, that your tool is carefully packaged and in-
clude a copy of your dated proof of purchase. You will help us to
react even quicker, if you describe the problem in short and
please don't forget to include your name, address and daytime
telephone number. We will respond in a prompt and reliable
manner.
Spare Parts
You can also order any necessary spare parts from our Service
Center at the above address. Please check the article-number of
the tool concerned on the nameplate of the tool and define the
part needed by using the explosion drawing in the manual that
came with the tool. Every part has a specific number (5 digit-
XX). Please provide us with this number when ordering.
For any further information call us toll free at 1-877-PROXXON
(1-877-776 9966) or visit us on the web at www.proxxon.com/us.
Made in Luxemburg
Distributed in North America by Prox-Tech, Inc
We reserve the right to make further alterations for the purpose of technical progress.
Advertisement
Related Manuals for Proxxon MICROMOT 50
Summary of Contents for Proxxon MICROMOT 50
- Page 1 Every part has a specific number (5 digit- XX). Please provide us with this number when ordering. For any further information call us toll free at 1-877-PROXXON (1-877-776 9966) or visit us on the web at www.proxxon.com/us.
- Page 2 MICROMOT 50 (E) Manual...
- Page 3 Notes - 2 -...
- Page 4 Fig. 1 Fig. 2 Fig. 3 - 3 -...
- Page 5 Foreword GENERAL SAFETY RULES Dear Customer, Warning! Read and understand all instructions. Before putting the machine into operation, read the Failure to follow all instructions listed below, may result in enclosed safety rules and operating instructions! electric shock, fire and/or serious personal injury. Save these instructions.
- Page 6 Schematics Spare parts list Please order spare parts in writing from PROXXON Service center (address on back of instruction manual) Part No.: Designation Part No.: Designation 28500 - 50 Union nut for collet chucks 28500 - 72 Left half of housing...
- Page 7 Avoid accidental starting. Be sure switch is off before SPECIFIC SAFETY RULES FOR plugging in. ROTARY TOOLS Carrying tools with your finger on the switch or plugging in Hold tool by insulated gripping surfaces when performing tools that have the switch on invites accidents. an operation where the cutting tool may contact hidden Remove adjusting keys or wrenches before turning the tool wiring or its own cord.
- Page 8 the other hand while in use. Allow for sufficient space The reason is that these wheels will grab if they become between your hand and the spinning bit. slightly canted in the groove, and can kick-back causing loss of control resulting in serious injury. Your second hand Round material such as dowel rods, pipes or tubing have a should be used to steady and guide the hand holding the tendency to roll while being cut, and may cause the bit to...
- Page 9 Warning: Functional Description Always wear goggles! The PROXXON Rotary Tool Micromot 50 / Micromot 50/E Do not use any broken grinding discs or bent shafts! is the ideal tool for precise drilling, milling, grinding, Wear a breathing mask when working under dusty polishing, brushing.
- Page 10 65.000 rpm Hard material: 1.500-2.000 rpm LIMITED WARRANTY OF PROXXON POWER TOOLS FOR HOME USE Prox-Tech, Inc., (“Seller”) warrants to the original pur- lated to problems with material or workmanship are not chaser only, that all PROXXON consumer power tools covered by this warranty.
Need help?
Do you have a question about the MICROMOT 50 and is the answer not in the manual?
Questions and answers