2
P
RODUCT DESCRIPTION
2.3 O
PERATING MODES
2.3
OPERATING MODES
Dispensing mode
2.3.1
This is the operating mode of the unit when switched
on. You can carry out the functions listed in the sections
below.
If text such as 'Prof 5 xxxxxxxx' is displayed
instead of 'ONLINE':
– The 'xxxxxxxx' product profile (memory
location 5) is activated.
– For more information, see the 'Using product
profiles' section.
Stopping /Continuing the dispensing
Stopping the dispensing:
Press the
button.
– The dispenser stops.
– One of the two texts appears:
ONLINE
Stopped. press
key to start.
or
ONLINE
Stopped. remove label. press
1) Second line = scroll text.
Continuing the dispensing:
If the lower text is displayed: Remove the label from
the applicator.
Press the
button.
Changing the counter reading
Set the counter reading using the
Dispense counter
function.
Starting the unit in configuration mode
To start the unit in configuration mode:
MACHINE SETUP > Turn-on mode
Set
Counting labels backwards
To count dispensed labels backwards from a starting
value to zero:
LABEL SETUP > Stop count. mode
Set
LABEL SETUP > Label stop quan.
Use the
define the starting value.
[22] Control panel in dispensing mode (292 labels dispensed)
1
1
key to start.
MACHINE SETUP >
to 'Offline'.
to 'Enabled'.
function to
26
ON
STATUS
Online
Labels
–
–
+
A
A Explanation of buttons in dispensing mode
ALS
20x
256
GB
292
+