Missing Labels; Material Tear - Avery Dennison ALS 204 User Manual

4 O
PERATION
4.2 C
ONFIGURATION AND MONITORING
If an error message occurs:
– The machine stops.
Press the button to delete the message.
Remove the rewound backing paper.
Insert a new material roll (see "Inserting a label roll"
on page 37).

Missing labels

A label missing from the label roll does not normally
affect the dispensing operation, because the label feed
continues until a label's edge passes under the label
sensor.
Nonetheless, it can be important that missing labels are
reported. By configuring the function
Miss. label tol., you can specify whether an error message
is triggered after one or several missing labels.

Material tear

If the material path tears, one of these two messages
appears:
Status num: 5002
Material end
Status num: 5140
Rewinder control
– Which message appears depends on where the
material path is torn.
– The machine stops.
Press the button.
LABEL SETUP >
49
ALS
20x
256
GB